Finished Grant Research Projects

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Filter by Categories

Ongoing research projects funded by grants are listed on separate page.

Počátek řešení projektu:
01/09/2017
Konec řešení projektu:
31/08/2019
Project ID: TJ01000457
Funding provider: Technology Agency of the Czech Republic 
Investigator at UCEEB: Ing. Alžběta Kohoutková
Project duration: 1. 9. 2017 – 31. 8. 2019
Partner: Nevšímal a.s. The aim of the project is 3D ceiling which can solve problem of acoustic and thermal comfort in an occupied zone. This ceiling will be designed for openplan offices, meeting, rooms and other administrative rooms. 1) The acoustic properties of the proposed 3D ceiling allow individual solutions of optimal reverberation, clarity and other acoustic comfort characteristics in the given space. 2) From the thermal comfort aspect the designed ceiling will be able to cope with ...
Detail >>
Počátek řešení projektu:
01/06/2018
Konec řešení projektu:
29/09/2020
Project ID: LTC18063
Funding provider: Ministry of Education, Youth and Sports, programme Inter-Excellence, Inter – Cost
Řešitel na UCEEB:  Ing. Pavel Reiterman, PhD.
Investigator at UCEEB: 1. 6. 2018 – 29. 9. 2020 The goal of the project is to describe the mechanism of secondary activation of reactive additions in cementitious composites subjected to environmental – especially freezing – action. The evaluation of active additions with potential to bring „self-healing“ behavior to concrete will be performed. The most active additions will be used for broad experimental program where the activation mechanism, its dynamics and its possible control will be studied by help of ...
Detail >>
Počátek řešení projektu:
01/01/2016
Konec řešení projektu:
31/07/2019
Project ID: CZ.01.1.02/0.0/0.0/15_019/0004908
Funding provider: OP Enterprise and Innovations for Competitiveness
Investigator at UCEEB: prof. Ing. Petr Hájek, CSc. 
Duration of the project: 1. 1. 2016 – 31. 7. 2019
Partner: Technofiber s.r.o. The aim of the project is to develop elements of small architecture such as pillars, beams, railings and fences, using modern materials such as high-quality concrete and woven reinforcements that will be subtle, aesthetic and with sufficient load-bearing capacity. It will be verified that the properties of the materials used conform to the relevant standards and that a suitable procedure for series production is developed. ...
Detail >>
Počátek řešení projektu:
01/10/2017
Konec řešení projektu:
30/09/2019
Project ID: TJ01000195
Funding provider: Technology Agency of the Czech Republic
Investigator at UCEEB:  Ing. Jana Horváthová, Ph.D. 
Project duration: 1. 10. 2017 – 30. 9. 2019 The objectives of the project are: 1) To design and verify parametric function of virtual air temperature for proper setup and control of thermal comfort for heating and cooling, which will include in main parameters attributes of a heating and cooling body, human customs and room environment (till 2018). 2) To integrate the function into a simple controller as precursor before output control function to improve efficient control of various advanced heating and cooling bodies especially ...
Detail >>
Počátek řešení projektu:
01/10/2017
Konec řešení projektu:
30/09/2019
Project ID: TJ01000195
Funding provider: Technology Agency of the Czech Republic
Investigator at UCEEB:  Ing. Jana Horváthová, Ph.D. 
Project duration: 1. 10. 2017 – 30. 9. 2019
The objectives of the project are: 1) To design and verify parametric function of virtual air temperature for proper setup and control of thermal comfort for heating and cooling, which will include in main parameters attributes of a heating and cooling body, human customs and room environment (till 2018). 2) To integrate the function into a simple controller as precursor before output control function to improve efficient control of various advanced heating and cooling bodies especially radiant systems ...
Detail >>
Počátek řešení projektu:
01/01/2018
Konec řešení projektu:
31/12/2019
Project ID: TJ01000045
Funding provider:  Technology agency of the Czech rebublic, programme Zeta
Investigator at UCEEB: Ing. Lukáš Velebil
Project duration: 1. 1. 2018 – 31. 12. 2019 The aim of the project is to develop advanced procedures for design and production of some configurations of steel and composite joints, which will enhance to safety and economic attractiveness of steel and composite structures. Partial aims:
  • Derivation of analytical formulae for calculation the effective width of concrete slab
  • in compression at the inner joint of the composite steel-concrete frame
  • Create an analytical model for verifying the bearing capacity of gusset plate
  • Determine ...
    Detail >>
Počátek řešení projektu:
01/01/2018
Konec řešení projektu:
31/12/2019
Project ID: TJ01000045
Funding provider:  Technology agency of the Czech rebublic, programme Zeta
Investigator at UCEEB: Ing. Lukáš Velebil
Project duration: 1.1.2018 – 31.12.2019 The aim of the project is to develop advanced procedures for design and production of some configurations of steel and composite joints, which will enhance to safety and economic attractiveness of steel and composite structures. Partial aims:
  • Derivation of analytical formulae for calculation the effective width of concrete slab
  • in compression at the inner joint of the composite steel-concrete frame
  • Create an analytical model for verifying the bearing capacity of gusset plate
  • Determine the process for cold welding ...
    Detail >>
Počátek řešení projektu:
01/01/2013
Konec řešení projektu:
24/11/2014
Project ID: TE02000202
Funding provider: Technological Agency of the Czech Republic
Investigator at UCEEB:  Ing. Jan Včelák, Ph.D.
Project duration: 1. 1. 2014 – 31. 12. 2019
Partners: ČVUT Fakulta elektrotechnická – coordinator, SAFIBRA s.r.o., LESIKAR, a.s., Honeywell International s.r.o., AŽD Praha s.r.o., SQS Vláknová optika a.s., Západočeská univerzita v Plzni / Fakulta aplikovaných věd, VUT v Brně/Fakulta elektrotehniky a komunikačních technologií The Competence Centre of Advanced Sensors is an association of Czech sensor and sensing systems manufacturers and research institutes. The centre will develop advanced sensors and methods for sensor data processing for wide area of industrial applications. The applications comprise advanced sensors and ...
Detail >>
Počátek řešení projektu:
01/07/2018
Konec řešení projektu:
30/10/2020
Project ID: CZ.01.1.02/0.0/0.0/17_107/0012468
Funding provider: OP Enterprise and Innovations for Competitiveness
Investigator at UCEEB: Ing. Daniel Adamovský, Ph.D., Ing. Jan Včelák, Ph.D.
Project duration: 1. 12. 2017 -31. 5. 2020
Partner: Korado a.s. The project deals with the development of a local air treatment unit using thermoelectric modules. The proposed unit concept allows fresh air to cool or heat and is therefore suitable for ventilation in buildings where it is adjustion of fresh air temperature is needed. The unit uses an innovative construction consisting of a passive and active modular part, thus enabling the recovery of heat from the exhaust air. This leads to ...
Detail >>
Počátek řešení projektu:
01/04/2017
Konec řešení projektu:
30/09/2019
Project ID: CZ.01.1.02/0.0/0.0/15_019/0004894
Funding provider: OP Enterprise and Innovations for Competitiveness
Investigator at UCEEB: doc. Ing. Tomáš Matuška, Ph.D.
Project duration: 1. 4. 2017 – 30.9. 2018
Partner: Atrea s.r.o. The project deals with the development of autonomous power station, which allows heating, ventilation including heat recovery, cooling and domestic hotwater preparation in all types of buildings with a primary requirement for the use of renewable energy, particularly with a view to a new generation of buildings with nearly zero energy consumption. The project responds to the European Parliament and Council Directive 2010/31 / EU, which mandates the reduction of energy consumption and the use of ...
Detail >>
Počátek řešení projektu:
01/07/2018
Konec řešení projektu:
30/06/2018
Project ID: TK01020075
Funding provider: Technology Agency of the Czech Republic
Investigator at UCEEB: Ing. Zbyněk Zelený
Project duration: 1. 7. 2018 – 30. 6. 2020
Partners: EnergyCloud, s.r.o. Goal of this project is development of an integrated battery storage with woodchip fired cogeneration ORC unit. Base of the technology will be a cogeneration ORC unit with nominal thermal output of 50 kW (currently operation in UCEEB laboratory), to which will be connected a specially modified battery storage system EnergyCloud with photovoltaic panel. First step will be a hardware combination of both technologies. As a part of that will be created industrial template for ...
Detail >>
Počátek řešení projektu:
01/01/2018
Konec řešení projektu:
31/12/2019
Project ID: CZ.07.1.02/0.0/0.0/16_040/0000364
Funding provider: Operational Programme Prague – Growth Pole of the Czech Republic
Investigator at UCEEB: Ing. Jakub Maščuch, PhD.
Project duration: 1. 1. 2018 – 31. 12. 2019 The aim of the project is to design and test a system for the use of waste heat from biomass (biowaste) and to prepare the system for commercialization. After the implementation of the project, the value of know-how will be increased through a demonstration. The global goal of development in the field of ORC (organic Rankine cycle) at CTU is to utilise the benefits of production of its own electricity available to ...
Detail >>
Počátek řešení projektu:
01/01/2017
Konec řešení projektu:
31/10/2017
Project ID: CZ.02.1.01/0.0/0.0/15_003/0000464
Funding provider: Operational programme Research, Development and Education
Investigator at UCEEB:  Ing. Petr Wolf, Ph.D.
Project duration: 1. 1. 2017 – 31. 10. 2022
The project is an ambitious effort to face challenges in the area of photovoltaics from atomistic models and novel solar panel element design to urbanistic and architecture design. Newly establish Center of Advanced Photovoltaics (CAP) at the Czech Technical University in Prague will provide, in partnership with University of Southampton, multidisciplinary environment to lay foundation of prime research in theoretical and applied photovoltaics. ...
Detail >>
Počátek řešení projektu:
01/01/2018
Konec řešení projektu:
31/12/2019
Project ID: CZ.07.1.02/0.0/0.0/16_040/0000364
Funding provider: Operational Programme Prague – Growth Pole of the Czech Republic
Investigator at UCEEB: Ing. Daniel Adamovský, PhD.
Project duration: 1. 1. 2018 – 31. 12. 2019 The aim of the project is to design, produce and test prototype climate window technology and prepare it for commercialization. A new solution of a special climate window with an optimal indoor environment for plant growth in the space between the outer and inner glazing will be proposed. The window will be specifically designed to support the conditions of different plant species while respecting the requirements for the condition of the ...
Detail >>
Počátek řešení projektu:
01/01/2017
Konec řešení projektu:
31/12/2018
Project ID: CZ.07.1.02/0.0/0.0/16_023/0000113
Funding provider:  Operational Programme Prague – Growth Pole of the Czech Republic
Investigator at UCEEB: Ing. Jiří Dostál a Ing. Jan Včelák, Ph.D. 
Duration of the project: 1. 1. 2017 – 31. 12. 2018 The content of the project is to support the preparation of technology transfer and knowledge transfer from CTU in Prague to areas and topics solved by the Prague City Government and the services and services provided to it. Support will be provided by verifying the feasibility and commercial potential of the ten sub-projects and their preparation for implementation. The result of the project should be the maximum ...
Detail >>
Počátek řešení projektu:
01/01/2018
Konec řešení projektu:
31/12/2019
Project ID: TJ01000384
Funding provider: Technology Agency of the Czech Republic 
Investigator at UCEEB: Mgr. Veronika Kandusová
Project duration: 1. 1. 2018 – 31. 12. 2019
Project Partner: Central European Data Agency, s.r.o. The objective is to create a software for testing model of multimodal planner while using participatory design methods. It will be ready for all types of users, including the handicapped, taking into account their specific needs, and will take into consideration all possible modes of transport and their combinations. At the same time it will include as many points of interest as possible. The planner will be an open platform ...
Detail >>
Počátek řešení projektu:
01/01/2018
Konec řešení projektu:
18/04/2020
Project ID: CZ.01.1.02/0.0/0.0/16_084/0010235
Funding provider: Operational Programme Enterprise and Innovations for Competitiveness
Investigator at UCEEB: Ing. Jakub Maščuch, Ph.D.
Project duration: 1. 1. 2018 – 18. 4. 2020
Partner: THERMAL TREND s.r.o. The subject of this project is industrial research and experimental development of a continuous soldering furnace with combined shifting of goods, which fundamentally changes the system of continuous soldering in the field of temperature control and energy consumption. The project partner then integrates an energy system that ensures not only the primary energy and electricity supply, but also provides cooling, waste heat utilization and interconnection to the plant’s energy systems ...
Detail >>
Počátek řešení projektu:
01/02/2018
Konec řešení projektu:
28/02/2019
Project ID: CZ.01.1.02/0.0/0.0/17_107/0012492
Funding provider: EU, OP PIK
Investigator at UCEEB: doc. Ing. Vladimír Zmrhal, Ph.D.
Project duration: 1. 2. 2018 – 28. 2. 2019
Partner: Recuair, s.r.o. In cooperation with the Recuair, s.r.o. company, we are developing a new type of small, energy-saving ventilation units with recuperation of heat. We participate on modeling of the flow and we measure the output and noise level of the new type of ventilation units. The aim is to develop ventilation units with higher efficiency of recuperation of heat using a new approach for defrosting the exchanger thanks to a new construction and design. The project reacts to the new ...
Detail >>
Počátek řešení projektu:
01/10/2016
Konec řešení projektu:
31/07/2019
Project ID: CZ.01.1.02/0.0/0.0/15_019/0004670
Funding provider: OP Entreprise and innovations for Competitiveness
Investigator at UCEEB:  Ing. Jakub Maščuch, Ph.D.
Project Duration: 1.10. 2016 – 31.7.2019
Partner: SVÚM a.s. The aim of the project is to develop and put into operation a system for detection of corrosion-risk states due to the condensation of the combustion constitutents. This system is primarily intended for cogeneration units with an ORC cycle where waste heat from alternative sources is used and operation is thus endangered by corrosion under the dew point. An early warning system is important because of the use of flammable media in ORC cycle heat exchangers and therefore ...
Detail >>
Počátek řešení projektu:
01/01/2016
Konec řešení projektu:
31/12/2017
Project ID:  LE15024
Funding provider: Ministry of Education, Youth and Sports (MEYS) – EUPRO II
Investigator at UCEEB: Ing. Mgr. Michal Kuzmič
Project duration: 1. 1. 2016 – 31. 12. 2017 Since 2016 CTU UCEEB became an active part in the European Energy Research Alliance – Joint Programme on Smart Cities. Our partners in the organisation are – among others – AIT (Austrian Institute of technology) or DTU (Dánská technologická univerzita). For the full list of members see the EERA website. UCEEB together with the Czech Institute for Informatics, Robotics and Cybernetics (CIIRC) and partners outside CTU (under leadership of Research Centre Řež) took ...
Detail >>
Počátek řešení projektu:
01/01/2015
Konec řešení projektu:
31/12/2017
Project ID: TA04021195
Funding provider: Technology Agency of the Czech Republic
Investigator at UCEEB:  doc. Ing. Tomáš Matuška, Ph.D.
Project duration: 1. 1. 2015 – 31. 12. 2017
Partners: Skanska, a.s. The objective of the project is to develop, test, certify and prepare for serial production two innovative components for the energy active curtain walling facade. facade module with hybrid photovoltaic-thermal collector will be designed for combined production of energy (electricity, heat, cold). Facade module with selective optical reflection raster will be used for purposes of diffuse lighting, passive solar gain in the winter and reflection of solar radiation in the summer for reduction of ...
Detail >>
Počátek řešení projektu:
01/01/2013
Konec řešení projektu:
30/06/2014
Project ID:  EAC – 2012-0600
Funded by:  European Comission
Project duration:  1. 1. 2013 – 30. 6. 2014
Investigator at UCEEB: prof. Ing. Petr Hájek, CSc.
partners: Cauberg Huygen Raadgevende Ir, Institute for Innovation and Development of University of Ljubljana, Metronik, VUPS Praha, Zuyd University CvB (coordinator)
web: http://www.eurl3a.eu/about-eurl3/
  • European Real Life Learning Lab Alliance – (01/2013 – 08/2014) was a pilot project within the European framework of the University–Business Cooperation initiative. The main aim of the initiative was to form the so called “Knowledge Alliance” (KA) to encourage structured, result-driven cooperation ventures between education, research and business bridging the gap between ...
    Detail >>
Počátek řešení projektu:
01/04/2016
Konec řešení projektu:
31/03/2020
Project ID: PGI01361
Funding:
 ERDF – Interreg Europe
Principal Investigator UCEEB: Mgr. Tereza McLaughlin Váňová
roject Coordinator CVUT: Karolina Tomešová, MSc.
Duration: 1. 4. 2016 – 31. 3. 2020
Partners: Extramadura Energy Agency (Lead Partner), General Direction of Industry, Energy and Mines, Extramadura Regional Government, INTELI, Autonomous Province of Trento, Managing Authority of Regional Operational Programme of Western Macedonia Region, City of Prague, Climate Protection and Energy Agency of Baden Württemberg, Plymouth City Council
Web: http://www.interregeurope.eu/finerpol/
  • UCEEB and City of Prague are both involved in Interreg Europe project FINERPOL.
  • The aim is to support new policies or improve existing policies aimed at creating financial instruments, particularly ...
    Detail >>
Počátek řešení projektu:
01/09/2015
Konec řešení projektu:
31/12/2018
Project ID:   VI20152018010
Funded by:  Ministerstvo vnitra ČR
Project duration:  1. 9. 2015 – 31. 12. 2018
Investigator at UCEEBprof. Ing. Evžen Amler, CSc. The main objective of the project is to create a qualitative new system to collect the scent imprints and maintaining these in selected solvents based on water-soluble nanofibers. The system will allow ultrasensitive adhesion of scent molecules onto a modified nanofibrous surface subsequently followed by a transfer of scent imprints into a form suitable for maintenance, transport and eventually for further chemical analyses leading to scent imprints digitalisation. These advanced chromatographic, eventually spectroscopic methods allow creation ...
Detail >>
Počátek řešení projektu:
01/06/2019
Konec řešení projektu:
31/05/2019
Project ID: LTI19013
Funding provider: Ministry of Education, Youth and Sports, programme Inter-Excellence
Investigator at UCEEB: doc. Ing. Lukáš Ferkl, Ph.D.
Project duration: 1. 6. 2019 – 31. 5. 2022 As a result of a low number of applications submitted to international project calls, the Czech Republic does not fully capitalise on drawing funds from international projects funded by the European Union. The project Improving the Quality of Support Infrastructure in the Field of Energy Efficient Buildings (Inform EEB-CZ) uses the platform EEB-CZ which was created within a project from the call EUPRO II to support and promote Czech organizations in the field ...
Detail >>